| 学术论文： |
第一责任作者部分论文列表： 1. Tao Yue, chunguo Liu, A springback prediction method for double-curved plate bent with the multi-point forming method, Proc IMechE Part G: J Aerospace Engineering, 234(12) 1939–1952 2. Bing Lv, Xingtong Chen, Chunguo Liu, A Highly Sensitive Piezoresistive Pressure Sensor Based on Graphene Oxide/Polypyrrole @ Polyurethane Sponge, Sensors 2020, 20(4),1219 3. Chun-Guo Liu, Tao, Yue, Xiao-Tong Yu, Springback analysis of the stiffened panel milling from the bent plate, International Journal of Precision Engineering and Manufacturing, Volume 20, Issue 2, pp217-232, February 2019, 4. Xingtong Chen, Chunguo Liu, Shuo Liu, Bing Lyu, and Donglai Li, A High Compressibility Pressure-Sensitive Structure Based on CB@PU Yarn Network, Sensors 2018, 18(12), 4141, 5. Chun-guo Liu, Tao Yue, Donglai Li, A springback prediction method for a cylindrical workpiece bent with the multi-point forming method, Int J Adv Manuf Technol, (2019)101:2571-2583, 6. Chun-guo Liu, Li jing, Dong Yanan, Zhang Xueguang, Yue Tao, Fracture prediction in the forming of aircraft Al stiffeners using multi-point dies, Int J Adv Manuf Technol, Vol.90, Issue9-12, May, 2017. p3109-3118 DIO 10.1007/s00170-016-9634-9, 7. Chun-guo Liu, Yuan Zheng, Xue-guang Zhang, Investigation of through thickness residual stress distribution and springback in bent AL plate by slotting method, Int J Adv Manuf Technol, Vol.90, Issue 1-4, April.2017, p299-308 8. 刘纯国，崔琪，岳韬，基于韧性断裂准则的铝合金壁板多点成形断裂预测，[J].ylzzcom永利总站学报（工学版），Vol.49,No.2, P513-520, 2019年3月, EI检索 9. 刘纯国，刘伟东，邓玉山，多点冲头主动加载路径对薄板拉形的影响，[J].ylzzcom永利总站学报（工学版），Vol.48(1), P221-228, 2018年1月 10. 张学广，刘纯国，郑愿，江仲海，李湘吉，基于延性损伤和剪切损伤的铝合金成形极限预测，[J]. ylzzcom永利总站学报(工学版), Vol.46, No.5, P1558-1566, 2016年9月 11. 张学广，刘纯国，张石磊，刘学之，李湘吉，轴向非对称中空型材拉弯过渡区长度优化，哈尔滨工业大学学报，Vol.47, No.10, P82-87, 2015年10月 12. Chun-guo Liu, Xue-guang Zhang, Xing-tong Wu, Yuan Zheng, Optimization of post-stretching elongation in stretch bending of aluminum hollow profile, Int J Adv Manuf Technol, Vol.82, Issue 9, Feb.2016, p1736-1746 |
